Caso CR3X Service Manual download pdf (Page 35)

caso CR3X Acid Etched 35

Please note

► If possible, keep the original packaging for the device for the

duration of the guarantee period of the device, in order that

the device can be re-packaged properly in the event of a

guarantee claim.

13.5 Electrical connection

In order to ensure the safe and trouble-free operation of the

device, the following instructions must be observed for the

electrical connection:

• Before connecting the device, compare the connection data

(voltage and frequency) on the rating plate with those of your

electrical network. This data must agree in order that no

damages occur in the device

If in doubt, ask your qualified electrician.

• The electrical outlet must be protected by a 16A safety cut-

out switch.

• The connection between the device and the electrical

network may employ a 3 meter long (max.) extension cable

with a cross-section of 1.5 mm². The use of multiple plugs or

gangs is prohibited because of the danger of fire that is

involved with this.

• Make sure that the power cable is undamaged and has not

been installed under the device or over hot or sharp

surfaces.

• The electrical safety of the device is only guaranteed if the

device is connected to a properly installed protective

conductor system. Operations using an electrical outlet

without a protective conductor are prohibited. If in doubt,

have the house installation checked over by a qualified

electrician.

The manufacturer cannot be made responsible for damages

that are caused by a missing or damaged protective

conductor.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 114 115

No comments

Caso CR3X Service Manual Page 35