Caso 1810 Datasheet download pdf (Page 42)

Operation and Handling

caso TeeGourmet 42

17.2 Tea brewing

1. Plug the power plug into the wall socket.

2. Open the lid of the tea maker. Use the teapot (3) to pour the

desired quantity of water (0,4 – 1 L) into the water tank (1).

Pour the water slowly, making sure that all water flows into the

tank. Closing the lid too soon will lock the valve and the

remaining water cannot enter the tank. Close the lid so that it

locks into place.

3. Remove the filter pot (2).

4. Place the funnel (9) onto the filter (8). This makes it easier to

add the tea. Place the desired amount of tea in the filter (8).

Use the quantity recommended by the tea manufacturer.

Remove the funnel (9). Close the lid ans insert the filter pot (2).

5. Close the lid of the teapot (3) and place it on the warming plate

(6).

6. Use the timer (7) to set the desired brewing time (2 -16

minutes).

► Do not change the time while the tea is brewing.

► Tea leaves absorb water, reducing the yield by about

½ - 1 cup.

► Brewing times are approximate, with a tolerance of about

+/-20-30 sec.

7. Now switch on(4) the appliance. The red LED (5) will light up.

8. The water boils.

9. After a few minutes the water will flow into the filter pot (2).

10. The warming plate (6) will warm-up the teapot (3) for two

minutes. At the end of the brewing time the tea flows into the

teapot (3).

11. The LED (5) turns from red to green.

12. The tea now is brewed, the warming plate (6) keeps it warm up

to one hour.

13. Wait 1-2 minutes before serving the tea to allow the aroma to

develop.

14. Now you can enjoy your tea.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 92 93

No comments

Caso 1810 Datasheet Page 42